Hubei Mingyuan Import and Export Trading Co., Ltd.

 

 

1.The equipment bed is welded with profiles and has been treated for failure to eliminate equipment stress. It has good rigidity and will not deform after long-term use. The surface is derusted and painted with iron red primer

2.Install grating protection on the front of the machine tool

3.The trimming, folding and hooking mechanisms are all driven by servo motors with ball screws

4.The transmission mechanism is a motor-driven clutch start and stop

5.All 3 sets of power heads of equipment are automatic locking mechanisms (one-key type change function is optional)

 

 

1.Processing thickness 0.4~0.6mm; workpiece material: cold rolled steel plate, galvanized steel plate, etc

2.Processing end cap diameter: φ200-φ650 mm

3.After peeling, the workpiece surface is smooth without ripples, indentations, burrs, cracks and other undesirable phenomena; the edge size accuracy is ±0.2mm

4.Equipment efficiency: ≤ 40 S/piece

5.The control circuit adopts DC24V safe power supply

6.Total installed capacity: ≤2.5KW

 

â–² To enable me give you correct proposal for correct machines, please tell me following details:

A: Technical drawing/Size of end caps you want to manufacture

B: What's the capacity per shift/day?

 

http://www.mingyuanequipment.com/