Hubei Mingyuan Import and Export Trading Co., Ltd.

 

 

1.The equipment bed adopts steel structure, which has been treated with multiple vibration failures. One end is closed, and the other end is a movable support door structure

2.Using 0.55-0.7MP compressed air as the motive force, the gas-liquid booster cylinder is driven to generate a pressure of 10-100T, first folding the front and back edges of the product at the same time, and then pressing and forming. ≥2 products can be made per minute

3.The folding and fastening mold materials are made of mold steel, and the heat treatment process requirements are strictly followed. After the mold trial is successful, the surface hardness treatment is performed to make the mold have both external rigidity and internal toughness

4.All up and down reciprocating and rotating parts are made of wear-resistant tin-zinc-copper

5.The subsequent maintenance cost is low, and only the seals of the booster cylinder need to be replaced ( all seals are imported brands )

 

 

1.Material: cold rolled steel sheet, galvanized steel sheet, color coated steel sheet, film coated steel sheet

2.Material thickness: δ=0.3～0.6m

3.Barrel size: Barrel length ≤3000mm , barrel diameter Φ240 ~ Φ750mm

4.Buckle width 8mm± 0.2mm, after buckling, the diameter deviation of both ends of the cylinder is ≤0.3mm

5.Production pace: 1.5 pieces per minute

6.Equipment energy consumption: 0.2kw

 

â–² To enable me give you correct proposal for correct machines, please tell me following details:

A: Technical drawing/Size of water heater outer shell you want to manufacture

B: What's the capacity per shift/day?

 

http://www.mingyuanequipment.com/